The 772 and 773 expand upon the capabilities of the popular 771
mA
Clamp Meter. Now all you have to do is decide which model will help
you save the most time.
The Fluke 771, 772 and 773 features:
-Best in class 0.2 % accuracy
-0.01 mA resolution and sensitivity
-Measure 4 to 20 mA signals without breaking the loop
-Measure mA signals for PLC and control system analog I/O
-Dual backlit display with both mA measurement and percent of 4 to
20 mA span
-Measurement Spotlight illuminates hard to see wires in dark
enclosures
-Detachable clamp with extension cable for measurements in tight
locations
-Measure 10 to 50 mA signals in older control systems using the 99.9
mA range
-Automatically change the 4 to 20 mA output for remote testing
-Power saving features, auto-off, backlight timeout extend battery life
-Hold function captures and displays changing measurements
772 and 773 add:
-Measure 4 to 20 mA signals with in-circuit measurement
-Simultaneous mA in-circuit measurement with 24V loop power for
powering and testing transmitters
-Source 4 to 20 mA signals for testing control system I/O or I/Ps
-mA output linear ramp or 25% step output
-Automatically change the 4 to 20 mA output for remote testing
773 Only Features:
-DC voltage measurement to verify 24V power supplies or voltage
I/O
signals
-Source DC voltage to test input devices that accept a 1-5V or 0 to
10V signals
-Scaled mA output provides a continuous mA signal that corresponds
to the 4 to 20 mA signal measured by the mA clamp
-Enables milliamp signal logging to a separate logging device without
breaking the loop
-Output mA signal enables a logging DMM or other device to record
the 4- to 20 mA signal without breaking the loop
-mA in/out: simultaneously measure the mA signal with the clamp and
source a mA signal
-Apply a mA input signal to a device and measure its' 4-20 mA output
on devices such as valves or mA isolators
-Voltage output linear ramp or 25% step output
-Automatically change the voltage output for remote testing