Processor-controlled stroboscope with many functions; menu guidance for easy operation; all functions selectable via plastic foil keypad; internal oscillator; internal burst; external trigger;
prescaler; line synchronization; readout RPM/Hz/ms; phase shift in 1/10° steps; slow motion; memory functions; display of absolute or relative deviation from a reference value; serial interface V 24
/ RS 232; software configurable as required.
Hand lamp type 900.02 included.
General Data:
Light Source:
external hand lamp model 900.02 with flash bulb (control unit without built-in flash bulb)
Flash bulb:
4pin socket-mounted Xenon-longlife, glass tube protected, model MS 300, Art.No.: 10058
Light intensity:
approx. 700 Lux in 50cm distance from reflector (beam axis)
Flash duration:
approx. 2-7µs
Frequency range:
Internal: 0,5 - 300 Hz = 30 - 18.000 RPM (min-1)
with automatic flash power control
External: 1 - 300 Hz = 60 - 18.000 RPM (min-1)
with automatic flash power control
Trigger action:
internal oscillator, external triggering or mains synchronous,
selectable via keypad,
with additional functions prescaler and slow motion
- Internal control:
via quartz-controlled oscillator,
adjustment via keypad
- External control:
via periodic signals (square; sine),
input signals from 300 mV to 50 Vss,
inputs and outputs isolated
- Main synchronization:
selectable via keypad
- Prescaler:
with this function, the external trigger signal can be prescaled
- Slow Motion:
generation of slow motion effects to an ext. trigger signal or
line frequency; adjustable duration
Phase shifter:
frequency-independent image shift (n x 360°) of the external trigger signal or line frequency; resolution: 0.01°,
zeropoint adjustable via keypad
Display:
alphanumeric LC-Display with background illumination (2x20 characters)
Memory:
25 storage locations for acquisition and logging; memory even after power failure or disconnection
Accuracy:
0,001% - quartz timebase
Flash power control / range switching:
automatically
Input for external triggering:
7-pole DIN female connector with bayonet cap
Pulse output:
3-pole DIN female connector with bayonet cap,
12V positive, internal resistance 600 O, for controlling other MOVISTROB types, ext.counter,etc
Seriel Interface:
3-pole DIN female connector with bayonet cap,
PC connection: V 24 / RS 232 - data exchange via two-wire cable,
Baud rates: configurable via jumper (see datasheet),
Formats: 7/8 data bits; N/O/E parity; 1/1.5/2 stop bits
Technical Data:
Power supply:
230V - 250V AC, 50-60 Hz or
115V AC, 50-60 Hz (on request)
Housing:
light metal, adjustable for height with carrying handle
Dimensions:
246 x 87 x 200 mm
Weight:
total weight approx. 3,5 kg
Notice:
Hand lamp model 900.02 included.
Male connector for external triggering included.